Products Line/Interactive : Up to 3 kVA

SPS PRO  CONTACT US NOW!  Do you need some help in  selecting a UPS? Find Our Contact Details  To download a PDF version of this Data  sheet click the link below.    If you do not have Acrobat reader  you can  download  it for free  here!  Contact us to discuss your specific requirements.  Do you need some help in  UPS? Permanent line – interactive stabilisation Controlled by microprocessor in order to supply a stable tension to the load by means of the AVR, Booster and Fader Functions, which imply an optimised use of batteries. Should the allowed limits be exceeded (+/-25%), the equipment supplies tension through the batteries. Communication Software Win 95/98/NT and Novell Netware. Display of the main parameters of the equipment and organised closure of files as back-up comes to its end. Warning for configurable alarms, current status chart, historical record of events, weekly agenda for turning off / starting, actual time network analyser. Advanced Functions ColdStart: Start up without presence of mains supply. SleepMode: Disconnection due to absence of load. ABM-Advanced Battery Management: battery charging sensitive to variations temperature. Protection of Fax facility/Modem line. Protecting device against overvoltages and overloads on the fax/ modem/Internet line through port RJ11. Test of the equipment: This can be also done anytime during operation by using the keyboard, or the software. Every time the equipment is started up, it tests the batteries and issues a warning signal in the event it becomes necessary to replace the batteries. TECHNICAL FEATURES   325.PRO 425.PRO 625.PRO 800.PRO 1000.PRO 1200.PRO Technology: Line-Interactive Input voltage: 172-287 Vac Stabilisation (AVR) Booster / Fader Input frequency: 50 / 60 Hz +/-10% (auto-detection) Output voltage: 230 Vac +/-5% (on battery) Waveform Stepwave (in battery) Output frequency: 50 / 60 Hz +/- 0,5% (on battery) Transfer time: 2/4 milliseconds Protections: Against overload, short-circuit EMI/RFI Filter: 10 dB at 0,15 MHz, 50 dB at 30 MHz Advanced functions: ColdStart / ABM / SleepMode Batteries Pb-Ca, sealed, maintenance free Recharging time: 4 hours at 90% of charge Interface (*) RS-232 (DB9, bi-directional) Communication software (*) > Win 95/98/NT + Novell Netware Protector for phone/modem line (*) 2 x RJ11 Battery protection Automatic self-test, replacement warning signal Safety standard EN50091-1 EMC Standard EN50091-2 Mark EC Quality ISO-9001 (*): except for model SPS.325.PRO HEIGHT POWER SIZE (d x w x h, in mm.) WEIGHT (VA/W) SPS.325.PRO 325 / 195 274 x 96 x 137 4,7 kg SPS.425.PRO 425 / 255 327 x 96 x 137 5,6 kg SPS.625.PRO 625 / 375 327 x 96 x 137 6,2 kg SPS.800.PRO 800 / 480 393 x 130 x 200 12,5 kg SPS.1000.PRO 1000 / 600 393 x 130 x 200 13,4 kg SPS.1000.PRO 1000 / 600 393 x 130 x 200 13,4 kg SPS.1200.PRO 1200 / 720 393 x 130 x 200 15,2 kg SPS TOP Continuous sinewave supply Continuous supply of output sinewave voltage, both when operating on stabiliser (Double Booster + Fader) and with batteries. The best quality output voltage is provided and is furthermore compatible with all of the critical loads that need to be protected. Complete Indications A complete synoptic chart allows a fast and easy understanding of the current status of the equipment. These are the indications displayed: Operation on network or batteries. Stabiliser mode in case of overvoltage (Fader) or voltage drop (Double Booster). Overload indicator and warning to replace batteries. Leds bar for battery status. Leds bar for connected load. Advanced Functions Added features and performance qualities as standard that contribute to provide an improved protection for connected loads: HotSwap: Batteries can be replaced by the user himself. ColdStart: Starting up without help from mains supply. SleepMode: Disconnection when there is no load connected. ABM-Advanced Battery Management: Batteries are charged in terms of temperature. Versions on 19" rack Available in four different power rates (800, 1250,1500 and 2000 VA) for networks and telecommunications applications. Communication Software By default in all models intended for monitoring the equipment via PC, along with the following functions: start/stop, mains failure warning signal and subsequent closing of files. TECHNICAL FEATURES   400.TOP 600.TOP 800.TOP 1000.TOP 1250.TOP 1500.TOP 2000.TOP 2500.TOP Technology: Line-Interactive Input voltage: 172-287 Vac Stabilisation (AVR) Double Booster / Fader Input frequency: 50 / 60 Hz +/-10% (auto-detection) Output voltage: 230 Vac +/-3% (in battery) Waveform Sinewave Output frequency: 50 / 60 Hz +/- 0,5% (in battery) Transfer time: 2/4 milliseconds Protections: Overload, short-circuit EMI/RFI Filter: 10 dB a 0,15 MHz, 50 dB a 30 MHz Advanced functions: ColdStart / ABM / SleepMode / HotSwap Batteries Pb-Ca, sealed, maintenance free Recharging time: 4 hours at 90% of charge Interface (*) RS-232 (DB9, bi-directional) Communication software (*) > Win 95/98/NT + Novell Netware Protector for phone/modem line (*) 2 x RJ11 Battery protection Automatic self-test, replacement warning / indicator Safety standard EN50091-1 EMC Standard EN50091-2 Mark EC Quality ISO-9001 HEIGHT POWER SIZE (d x w x h, in mm.) WEIGHT (VA/W) SPS.400.TOP 400/ 240 435 x 140 x 208 13 kg SPS.600.TOP 600 / 360 435 x 140 x 208 13,4 kg SPS.800.TOP 800 / 480 435 x 140 x 208 14,2 kg SPS.1000.TOP 1000 / 600 435 x 140 x 208 15 kg SPS.1250.TOP 1250 / 750 435 x 140 x 208 18 kg SPS.1500.TOP 1500 / 900 440 x 170 x 225 22,2 kg SSPS.2000.TOP 1200 / 720 440 x 170 x 225 26,9 kg SSPS.2500.TOP 1200 / 720 440 x 170 x 225 30 kg Models available on 19" rack SPS.800.TOP R 800 / 480 388 x 483 x 130 (3U) 19 kg SPS.1250.TOP R 1250 / 750 388 x 483 x 130 (3U) 23,5 kg SPS.800.TOP R 1500 / 900 388 x 483 x 130 (3U) 26,1 kg SPS.800.TOP R 2000 / 1200 388 x 483 x 130 (3U) 28,4 kg