Products Three Phase UPS 5kVA-300kVA

Technology  CONTACT US NOW!  Do you need some help in  selecting a UPS?  To download a PDF version of this Data  sheet click the link below.    If you do not have Acrobat reader  you can  download  it for free  here!  Automatic shutdown Software and UPS  Monitoring  System Enhancement software, which operates using  the RS232 interface, is offered with this range of UPS  and control.   Allows controlled, unattended shutdown of one or more operating systems.   Compatible with all major operating systems (Windows ’95,Windows NT, OS/2, Novell Netware, SCO UNIX , Solaris, HP, UX, IBM-AIX).   Allows all UPS operating parameters to be viewed and monitored.   Allows actions to be configured, eg. Sending network messages, e-mail or pager.   Provides full function reporting.    Optional Extras Extended autonomies, with additional batteries supplied in matching battery cabinets.   By-pass isolation transformer, provides full galvanic isolation while the UPS is operating on by-pass.   Remote control panel to monitor the UPS status from a remote location (max.500m).   External maintenance By-pass. Electronically isolates the UPS from the mains as well as from the critical load. Allows full interlocking with the UPS to prevent incorrect use.   Dial UPS remote monitoring allows the UPS to be monitored by our central monitoring station..    Contact us to discuss your specific requirements.  Do you need some help in  selecting a UPS? On-line double conversion with static by-pass Application True on-line protection for mission critical main frames, computer suites and industrial control room applications Benefits & Features   Easy installation - good cable access, batteries supplied ready   mounted in cabinet.    Small footprint.   Quiet operation due to high frequency IGBT’s operating outside   audible range (PWM switching >20KHz).    Excellent dynamic response.    Excellent non linear load response..    Handles 100% unbalanced loads.   Integral maintenance by-pass.    Emergency power off (EPO)facility.   LCD display panel, provides status and stores last 50 alarm   conditions. Mimic flow diagram for quick status reference.   Monitoring and communications via RS232 and RS485   communication ports. IBM AS-400 interface.   General Technical Characteristics   Technology      Type Control On-line, double conversion with static by-pass. Microprocessor Input Voltage Frequency Three phase 208/220/380/400/415V±15% (3 wires+N) 50 or 60HzHz ± 5% Output Voltage Regulation Frequency Max, synchronization rate Wave Form Efficiency Total harmonic distortion   Phase displacement Dynamic response time Inverter overload Crest factor Power factor 208/220/380/400/415V,Three phase ±1% during steady state ±2% during transient state. 50 or 60Hz synchronized with mains. During mains failure ± 0.05% ±1Hz/sec pure sine-wave 90-92% depending on model <2% at full load 120°±1% (balanced load) , 120°2%± (50% unbalanced load) 10ms, to 98% of static value Up to 200% for 20 sec 3 to 1 Accepts 0.7 lagging to 0.7 leading Static By-pass Type Operating Capability Transfer from inverter to mains to inverter Transfer from inverter to mains Transfer time Solid state (microprocessor controlled) 500% for 10 sec. Short circuit for 40ms Automatic, following synchronization. After 20s for overload between 110% and 200% Immediate for overload >200% Nil Manual maintenance By-pass Make before break Integral as standard on all models. External, wall mounted interlocked switch is optional Batteries Type Recharge time Sealed lead-acid maintenance free. Typically 2 hours from depleted battery to 80% capacity. Communications Relay Interface RS-232/485 port Serial port for automatic closure of files and subsequent shutdown of the UPS Incorporated as standard feature on entire range. Environment Input/Output efficiency Audible noise Operating temperature EMC Safety Packaging Connections Relative humidity Operating altitude 90-92%, depending on the model <45 dB at 1m 0 to 40°C EN50091-2,EN55011,level B, IEC1000-4-1,2,3,4,5 EN50091-1 Without CFC, recyclable Hardwired, input/output terminal blocks 0 to 95% non condensing Sea level to 2,400m Incorporated as standard feature on entire range.   MODEL   Power No Cabinets (min)*   Autonomy at typical load (min)*   UPS Dimensions(mm)   UPS Weight kg   Battery Cabinet Dimensions (mm)   Cabinet Weight kg   kVA UPS + Battery   Width   Height   Depth   Width   Height   Depth  PW3-UPS-5 5 1 - - 15 600 1235 750 290 - - - -  PW3-UPS-7.5 7.5 1 - - 7 600 1235 750 305 - - - -  PW3-UPS-10 10 1 - - 6 600 1235 750 325 - - - -  PW3-UPS-15 15 1 - - 8 600 1235 750 437 - - - -  PW3-UPS-20 20 1 - - 5 600 1235 750 477 - - - -  PW3-UPS-30 30 1 - - 5 600 1235 750 477 - - - -  PW3-UPS-40 40 1 - - 5 600 1235 750 591 - - - -  PW3-UPS-50 50 1 - - 7 640 1735 810 902 - - - -  PW3-UPS-60 60 1 + 1 8 640 1735 810 545 640 1735 810 536  PW3-UPS-80 80 1 + 1 7 640 1735 810 680 640 1735 810 825  PW3-UPS-100 100 1 + 1 10 880 1480 980 870 700 1480 980 910  PW3-UPS-120 120 1 + 1 5 880 1480 980 920 700 1480 980 910  PW3-UPS-140 140 1 + 1 5 880 1480 980 920 700 1480 980 1200  PW3-UPS-160 160 1 + 2 6 880 1480 980 1055 700 1480 980 865